GAF Master Elite Contractor | BBB A+ Rated | 5.0 Stars Based on 500+ Customer Reviews | 3,700+ Total Projects Completed

What Our Customers Say

We are large enough to get the job done right, yet small enough to provide old-fashioned customer service. Here is real feedback from the Westlake Hills homeowner whose roof we replaced.

Paul McAlinden
Nick did a great job working with the insurance company to get the claim approved. The office staff provided clear updates throughout the entire process. The crew were awesome. They worked long hours to get the job done quickly without compromising quality. The final results are amazing!! If you are in need of a roof replacement in northwest Austin, I would recommend you check Driftwood out.

STORM-DAMAGE ROOF REPAIR

Oak Branch TPO Roof Puncture Repair in Bouldin Creek, Austin, TX 78704

A fallen oak branch punctured a multilayer low-slope roof, requiring partial TPO replacement, deck reconstruction, insulation and sheetrock repairs, plus a metal-roof pipe seal.

Get a Free Roof Repair Estimate

Driftwood Builders Roofing inspected the storm damage the same day it was reported, provided a clear estimate, and completed the repair  including the expanded scope for hidden water damage  within a week of the initial contact.

Roofing contractors in Austin, TX
Years
20 +

Why Austin Homeowners Choose Driftwood Builders Roofing

We’re not a franchise. Not a storm chaser. We’re a family-built roofing company that has called Central Texas home for over 20 years — and we’re still here because we do the job right.

Project Summary

Storm-Damage Roof Repair for Oak Branch Puncture in Bouldin Creek, Austin, TX 78704

SpecificationDetails
LocationBouldin Creek, Austin, TX 78704
Project typeStorm-damage repair
Roof systemsTPO + metal
TimelineApprox. ½ day
Recommended scopePartial roof reconstruction
Investment$5,400
Plastic-covered hole in a concrete surface with rust and dark stains nearby; secured by black tape along the edge.

Project Overview

Driftwood Builders Roofing repaired storm damage on a combination metal and TPO roof in Bouldin Creek. An oak branch had punctured the low-slope membrane, allowing water to move into a concealed multilayer assembly. The customer contacted Driftwood immediately, and the team inspected the damage that day, provided an estimate, and scheduled the repair in less than a week.

 

Opening the membrane confirmed that the repair involved more than a surface patch. The existing assembly contained gray TPO membrane, insulation, approximately ¾-inch OSB roof decking, and ¼-inch sheetrock. Damaged and deteriorated materials within the affected area had to be removed and reconstructed before a compatible new TPO membrane could be installed and heat-welded.

 

The project also addressed a separate pipe penetration on the second-floor metal roof. The final documented investment was $5,400: $5,200 for the partial TPO replacement and deck reconstruction, plus $200 to clean and seal the metal-roof pipe flashing.

Close-up of a weathered metal pipe passing through a circular bolt-flange on a gray surface, with peeling paint and rust around the joint.

What Happened to This Bouldin Creek Roof?

A tree limb can cause concentrated impact damage that a membrane roof was not designed to absorb. In this case, the oak branch created a direct puncture in the TPO roof. Water intrusion then affected components below the visible membrane, which is why the final repair required removal and reconstruction rather than sealant alone.

Can a Punctured TPO Roof Just Be Patched?

Sometimes, but not always. If a puncture is caught quickly and the insulation and roof deck underneath remain dry and sound, a localized membrane repair may be possible. If water has entered the roof assembly, however, damaged insulation, decking, or interior materials may need to be removed before the membrane can be properly repaired.

On this Bouldin Creek project, the oak branch puncture allowed moisture into a multilayer roof assembly, so the repair ultimately required removal and reconstruction of affected TPO membrane, insulation, OSB decking, and sheetrock.

This is why a puncture on a commercial or low-slope TPO roof should not always be treated as a simple patch. The visible hole may only be the part of the problem that can be seen from the surface. Once the membrane is opened, hidden moisture or damage underneath can require a more extensive repair.

Detailed Scope of Work

Partial TPO Roof Replacement and Deck Reconstruction — $5,200

Metal-Roof Pipe Seal — $200

Rooftop renovation scene with torn insulation, debris, and scattered tools like a drill and brush.

Why the Repair Cost Increased After the Roof Was Opened

A visible membrane puncture does not always reveal the full extent of damage below it. The proposal pricing reflects concealed conditions discovered after the existing membrane was opened. Because the TPO, insulation, OSB, and sheetrock were adhered in layers, the crew had to remove enough of the assembly to reach sound material and rebuild the repair area correctly.

 

This is different from applying a surface patch over a hole. A durable repair required replacement of affected materials, compatible membrane installation, heat-welded seams, seam probing, and inspection of the completed work. The proposal also required documentation and customer approval before addressing any additional deterioration outside the exposed repair area.

Plastic-covered hole in a concrete surface with rust and dark stains nearby; secured by black tape along the edge.

What Should You Do If a Tree Branch Punctures a TPO Roof?

On this Austin 78704 repair, the visible oak-branch puncture had already allowed water into multiple roof layers.

Repair Documentation Photos

The following images were included in the project proposal and document the multilayer roof assembly, the puncture area, and the separate metal-roof pipe detail.

How Much Did This TPO Roof Repair Cost?

The complete repair investment was $5,400. Most of the cost was associated with opening and reconstructing the concealed multilayer low-slope assembly rather than simply covering the visible puncture.

The majority of the $5,400 cost came from reconstructing the concealed roof assembly—not from covering the visible puncture.
Repair scopeInvestment
Partial TPO replacement and deck reconstruction$5,200
Seal pipe penetration on second-floor metal roof$200
Total Driftwood Quality Roof Repair$5,400

Important Pricing Disclaimer

This price applies only to the documented conditions and repair scope at this property. TPO repair costs vary with access, affected area, membrane type and age, insulation, deck construction, interior damage, equipment, penetrations, drainage, labor, and concealed deterioration. Any damage outside the opened repair area should be documented and approved before additional work proceeds.

What Our Customers Say

We are large enough to get the job done right, yet small enough to provide old-fashioned customer service. What This Bouldin Creek Customer Said About the TPO Repair
Aaron Deane
I have a combination metal and TPU membrane roof that an oak branch had punched a hole through at some point. I contacted Driftwood and Nicholas reached out the same day and was out the following morning to inspect the damage and provide an estimate. Getting the repair scheduled took less than a week. I understood that there was likely more damage due to water intrusion and when Guillermo came out for the job the scope of the work had to be increased. He explained to me clearly what the total damage was and what needed to be done to fix it properly. Unfortunately the total damage and cost ended up being much more than the original estimate but I was very pleased with the quality of the repair and communication. I would absolutely call Nick and Guillermo at Driftwood again for any roofing needs.

How We Handle a TPO Roof Puncture Repair

1. Inspect the Damage

Identify the puncture, visible water entry and surrounding membrane condition.

2. Open the Affected Area

Remove enough membrane and roof assembly to determine whether moisture has reached insulation or decking.

3. Rebuild Damaged Components

Replace deteriorated insulation, decking and related materials as necessary.

4. Install & Heat-Weld New TPO

Install compatible membrane and heat-weld the new seams and transitions.

5. Probe & Inspect the Repair

Check welds and details for a watertight finished repair.

Related Austin Roofing Resources

More on the shingle system, decking work, and insurance process behind this Tarrytown project.

Brick suburban house with a covered front porch, large tree and wooden swing in the yard; green lawn and shrubs line the walkway to the door.

South Austin Roofing

Trusted South Austin roofing contractor serving Zilker, Bouldin, Travis Heights & 78704 since 2005. GAF Master Elite certified, 4.9 stars, free inspections, no deposit required.

Two workers on a sloped metal roof, one standing near the edge and another bending with a hammer amid vents against a cloudy sky

Austin TPO Roof Repair

Heat-welded TPO membrane repairs for flat and low-slope roofs — leak diagnosis, seam resealing, and puncture patching. Built for Austin's heat and UV exposure without a full membrane tear-off.

Stone-clad house with a circular pool, patio seating, and manicured landscaping under a bright blue sky.

Austin Flat Roof Repair

Leak, ponding, and membrane repair for flat and low-slope roofs on homes and businesses. Free inspection catches drainage issues before they spread.

Aerial view of a light-gray metal standing-seam roof with long ridges, with a green shrubbery along a wall on the left side and neighboring house siding visible nearby.

Emergency Roof Repair

24/7 response for storm, hail, leak, and fallen-tree damage across Austin. Typically inspects or responds within 24 hours, with tarping to stop further water intrusion.

Commercial Roof Repair

Leak, membrane, and flashing repair for flat, low-slope, and pitched commercial roofs. Scheduled around tenant and business operations to minimize disruption.

Clay tile roof with red-orange tiles extending toward a distant city skyline and trees under a cloudy sky.

Tree Damage Roof Repair

Inspection and repair after fallen limbs or storm-tree damage, checking for water intrusion and structural concerns. Includes emergency tarping and insurance-claim documentation.

What Do Austin Homeowners Say About Our Roofing Work?

These Austin homeowners share their experience with roof inspections, storm-damage claims, repairs, replacements, and how our team communicated along the way.

Join hundreds of satisfied customers who voted us the best roofer Austin has to offer

Roofing Tips & Education

Frequently Asked Questions About TPO Puncture Repairs

Can a punctured TPO roof be repaired instead of replaced?

Yes, when the puncture is isolated and the surrounding membrane and roof deck are otherwise sound. On this Bouldin Creek project, a partial TPO replacement and deck reconstruction resolved the damage without a full roof replacement. Full replacement only becomes necessary if damage extends well beyond the impact area.

Water can migrate into the layers below the membrane, including insulation, OSB decking, and sheetrock in a multilayer assembly. On this project, the puncture allowed water to reach insulation, approximately ¾-inch OSB decking, and ¼-inch sheetrock beneath the membrane. Left unaddressed, trapped moisture leads to deterioration of those underlying materials over time.

The crew first inspects the puncture and assesses how far water has traveled beneath the membrane, then opens the affected area to expose the membrane, insulation, decking, and sheetrock. Any damaged materials found below the surface are removed and reconstructed, and new compatible TPO membrane is installed with seams and transitions heat-welded. The completed welds are then probed and inspected for a watertight finish.

A visible puncture doesn’t always show the full extent of damage underneath. Opening the membrane can reveal wet insulation, damaged decking, or affected sheetrock that wasn’t part of the original estimate. On this project, those concealed conditions were documented and required customer approval before the expanded scope proceeded.

How much does a TPO roof puncture repair cost in Austin?

This Bouldin Creek project totaled $5,400, including $5,200 for partial TPO replacement and reconstruction of affected underlying materials plus $200 to clean and seal a separate metal-roof pipe penetration. Cost varies with access, affected area, membrane age, insulation, decking condition, and concealed deterioration found once the membrane is opened.

No, wet or deteriorated insulation should be removed before a new membrane is installed. Sealing over wet insulation traps moisture and undermines the new repair. On this project, wet insulation within the affected area was removed and replaced as part of the reconstruction.

Yes, a partial replacement addresses the affected section of membrane and assembly rather than the entire roof. On this project, roughly half of the low-slope roofing area surrounding the puncture was removed and reconstructed, with the new membrane section heat-welded to the existing membrane to maintain a watertight seal.

This project’s proposal listed an estimated timeline of approximately half a day for the physical repair, subject to field conditions. Scheduling from initial inspection to the repair date took less than a week, and same-day inspection is typical once damage is reported.

Roof Repair Services Near Bouldin Creek

Driftwood Builders Roofing provides roof inspections, emergency leak response, TPO and other low-slope roof repairs, metal-roof repairs, storm-damage documentation, roof replacement, flashing repairs, ventilation, and exterior services throughout Austin and Central Texas. Property owners in Bouldin Creek, South Congress, and ZIP code 78704 can request an inspection and a detailed proposal based on visible and concealed conditions.

Scroll to Top

Get Your Free Roof Inspection

Fast, honest, no-obligation, for -area homes.